Monolithic, Low-Voltage 1G x 8 CMOS DDR3L SDRAM in 78-Ball FBGA Package

8-Gb Device by Alliance Memory Increases Power Efficiency for High-End Computer and Storage Systems

1Alliance Memory has introduced a new monolithic high-speed, low-voltage CMOS double data rate 3 synchronous DRAM (DDR3L SDRAM) with an 8-Gb density in the 78-ball, 9-mm by 13.2-mm, lead (Pb)-free FBGA package. Delivering increased power efficiency for high-end computer and storage systems, the 1G x 8 AS4C1G8MD3L offers a double data rate architecture for extremely fast transfer rates of up to 1600 Mbps/pin and clock rates of 800 MHz.

The AS4C1G8MD3L’s transfer rates are twice as high as DDR and DDR2 SDRAMs, providing higher bandwidth for newer-generation microprocessors in industrial, medical, networking, telecom, and aerospace applications. The 8-GB DDR3L SDRAM operates from a single +1.35-V power supply and is backwards-compatible with +1.5-V power supplies to enable large memory subsystems. The device is a logical choice for customers that require increased memory yet face board space constraints.

The AS4C1G8MD3L is available with an extended commercial temperature range of 0 °C to +95 °C (AS4C1G8MD3L-12BCN). Internally configured as eight banks of 1G x 8 bits, the DDR3L SDRAM features a fast 64-ms, 8192-cycle refresh from 0 °C to +85 °C and 32 ms from +85 °C to +95 °C.

The device released today offers fully synchronous operation and provides programmable read or write burst lengths of 4 or 8. An auto precharge function provides a self-timed row precharge initiated at the end of the burst sequence. Easy-to-use refresh functions include auto- or self-refresh, and a programmable mode register allows the system to choose the most suitable modes to maximize performance.

In addition to the 1G x 8 AS4C1G8MD3L, Alliance Memory also offers the 512M x 16 AS4C512M16D3L in the 96-ball FBGA package, which is available in an extended commercial temperature range (AS4C512M16D3L-12BCN) and an industrial temperature range from -40 °C to +95 °C (AS4C512M16D3L-12BIN). Alliance Memory is one of the few suppliers of monolithic DDR3L SDRAMs with high densities to 8 Gb. In addition, with minimal die shrinks, the single-die AS4C1G8MD3L provides a reliable drop-in, pin-for-pin-compatible replacement for a number of similar solutions — eliminating the need for costly redesigns and part requalification.

For more info visit: www.alliancememory.com.

SHARE
Previous articleSMT Gas Discharge Tubes from Littelfuse in Smaller Footprints
Next articleSTMicroelectronics Simplifies Design-In of State-of-the-Art Security for the IoT
ELE Times provides a comprehensive global coverage of Electronics, Technology and the Market. In addition to providing in depth articles, ELE Times attracts the industry’s largest, qualified and highly engaged audiences, who appreciate our timely, relevant content and popular formats. ELE Times helps you build awareness, drive traffic, communicate your offerings to right audience, generate leads and sell your products better.

LEAVE A REPLY