Webinar Alert! Keysight Brings Digital Design & Test Webcast Series

120

Hosted by: Electronic Design and Microwaves & RF
Sponsored by: Keysight Technologies
Theme: Extreme Oscilloscope Probing Challenges and Solutions
Date: Thursday, February 16, 2017
Timings: 1:00 PM ET | 10:00 AM PT

Electronic products are getting smaller and tightening environmental specifications as designs become more versatile. Signals are getting faster and smaller too. These trends in electronics pose challenges for making accurate oscilloscope measurements.

This webcast will cover measurement techniques and probing solutions associated with making extreme oscilloscope measurements that include extended operating temperatures, measuring small voltages, measuring small currents, and probing signals in tight spaces.

Click To Register

Theme: USB Type-C Design Implementations – Overcoming Test Challenges
Date: Tuesday, February 21, 2017
Time: 1:00 PM ET | 10:00 AM PT

The USB Type-C ecosystem includes technologies like USB 3.1 Gen 2, USB-PD, MHL, Thunderbolt 3, DisplayPort, and HDMI Alt Mode. As the USB Type-C ecosystem moves into the mainstream with worldwide adoption, there are significant learnings from early silicon and system implementations. This session will illustrate the most common challenges and issues with implementing USB Type-C, and solutions to properly characterise and validate your designs.

Click To Register

Theme: Test with Data Analytics to Enable Faster Time to Market
Date: Wednesday, March 8, 2017
Time: 1:00 PM ET | 10:00 AM PT

R&D designers perform measurements to conclude if their designs meet past limits set by the high-speed Standard committee or the company’s standard design guidelines. This webcast will discuss how Keysight’s new Data Analytics software capability addresses the needs of designers and their managers to be able to analyse their test results more quickly and in an intuitive manner. Attendees will learn how Keysight’s Data Analytics software will enable them to make faster decisions and reduce time to market of their products.

Click To Register

Theme: Characterizing and Modeling Switch Mode Power Supplies
Date: Wednesday, March 15, 2017
Time: 1:00 PM ET | 10:00 AM PT

Whether your power supply designs are based on switch mode or linear technology, there are many reasons why you should characterise the frequency response of your power supply designs.

During this webcast, you will learn how to perform a PSRR measurement using an oscilloscope, perform a Control Loop Response measurement (Bode gain & phase) using an oscilloscope, determine the PWM ramp and current sense resistance using these measurements, and construct an accurate simulation model for optimisation and worst-case tolerance assessment.

Click To Register

LEAVE A REPLY